FIRMWARE CHANGES

29412:
- Added input Operation.ShadowMode bit to indicate when the regulator is working in shadow (1) or normal (0)

29295:
- Added support for Concurrent CPU
- Disable NCC when Bottom Limit Switch is active
- Added RegStatus ControlPowerProgramPercent (400673) and ControlSmartARCPercent (400674) for Modbus map publishing
- Fixed alarm timing problem for PLC Not active, SmartARC not active, Local I/O fault and Short Electrode. Real timing was triple the configured unless a user saved the AlarmLimits model
- Fixed FiringCircuitReplacement unable to reconnect after trying 120 times.
- Updated documentation: RegStatus ControlPowerProgramPercent and ControlSmartARCPercent; Operation.ChargePowerOnTime_Offset units and divisor; SmartARCSupport.* divisors

28281:
-Added FCR Modbus Address Offset

26077:
- Updated the Dynamic NCC logic, now supports DynNCCMinPressure, DynNCCMaxPressure and EnableNCCDynamicOffline special variables
- Fixed End of charge input from SmartARC

25597:
- Fixed the Nexus reconnection logic, it stopped trying after a long unsuccessful period

25299:
- AutoLower has a delayed start (OnDelay)
- AutoLower overrides the Vsp & Isp


24834:
- Fixed incorrect fatal error.

24330:
- Fixed memory corruption occurring when an HMI was closed or lost its connection, and a user saves the model in the FurnaceType screen.

23611:
- Added UseFastRaise, Speed and Ramp properties to ShaperGains

__________________________________________________________________________________________

HMI CHANGES

29473:
- Added support for hiding the HMI when operating in Shadow mode and showing it when being active (General Settings), useful when there are multiple controllers

29297:
- Updated documentation: RegStatus ControlPowerProgramPercent and ControlSmartARCPercent; Operation.ChargePowerOnTime_Offset units and divisor; SmartARCSupport.* divisors

29031:
- Fixed IOConfiguration voltage divider R2 control that was being hidden incorrectly on single electrode furnaces

28280:
- Added Electrical System - FCR Modbus Address Offset

26223:
- Fixed online help and updated Auto Lower text and images
- Fixed bug that caused exported files miss columns containing tag or id, like Voltage
- Added missing AdvancedControlProfile column to Heat Report

25993:
- Added balance column to statistics dialog
- Fixed a potential model corruption in the model Undo button
- Fixed External Data loading issues

25680:
- Improved the Electrode Tests information gathering to prevent incomplete test packagess. 

25481:
- Fixed display Dynamic NCC Setpoint scale. The scale adjustment depends on Min and Max pressures at the Analog Inputs.
- Improvement at Proxy Service, after save Network Settings the service is reconfigured automatically in order to let other services (Trends & HMI) communicate with QNX.

25299:
- Added CurrentSetpoint and ActionDelay to AutoLower Model Isp and OnDelay added. 
- Screen layout improved. Units labels corrected.
- ReSized the Color Boxes for selecting the color of the trend
- Improved upgarde time to be applied

23812:
- Fixes to LEDs (Auto, JS Raise, JS Lower) on twin shells without independent electrodes
- Added Invert setting to Encoder channel
- Fixed bug in Furnace Type that prevented it from being saved

23611:
- Shaper Screen - Speed, Ramp and enable checkbox for FastRaise 
- Spanish translation - Shaper Screen - Speed, Ramp and enable checkbox for FastRaise